top of page
Search

Bridge Production While Your Injection Mold Is Being Made: FDM vs SLS or MJF

Oct 27
6 min read

Yes. 3D printing is a common way to keep parts flowing while an injection mold is being made. For a few hundred small nylon parts with no special material requirement, an SLS or MJF bureau is usually the efficient route. FDM is often the better bridge when the part needs carbon-fiber nylon (PA-CF), PPA-CF or PPS-CF (we keep all three in stock) or polypropylene for chemical resistance, and when you want a person to review the file, a same-day quote and no minimum order. 3D Infinity Printing is an FDM shop in Columbia, Missouri and St. Petersburg, Florida (both by appointment), shipping to all 50 states.

This guide is for product engineers, manufacturing engineers and buyers who have a mold on order, a launch date that won't move, and a gap in between. It explains what bridge production is, how FDM compares with powder-bed printing (SLS and MJF) for that gap, and how to plan the run so the printed parts don't cause problems when the molded parts arrive. For our low-volume production service, see prototype to production 3D printing.

What is bridge production?

Bridge production means making real, usable parts with a faster process while the production tooling is being built, then switching to the molded part once the tool is approved. The printed parts "bridge" the gap so that pilot builds, early customer orders, field trials or a trade-show launch don't wait on the tool shop.

A bridge run is different from prototyping. A prototype answers a design question. A bridge part has to do the real job, in the real assembly, for the weeks or months before molded parts take over. That raises the bar on material choice and consistency, and it is why the process you pick matters.

When does a printed bridge run make sense?

Bridge production with 3D printing usually makes sense when:

  • The mold is weeks or months out and you need parts sooner for pilot builds, validation or first shipments.

  • The quantity is modest: dozens to a few hundred parts, not tens of thousands.

  • The design may still change. A printed run costs no tooling, so a late revision costs another print, not a mold change.

  • You want to test the market before the volume is known. A bridge run lets early orders prove demand before you commit to cavities and volumes.

It makes less sense when the part depends on a molded-only feature (a living hinge in production polypropylene, a cosmetic Class A surface, a texture cut into the tool), or when the quantity is already in the thousands per week. At that point the gap is better covered by a quick aluminum tool or by pulling the schedule in. Our comparison of FDM and injection molding for low-volume parts covers that crossover in more detail.

Is SLS, MJF or FDM better for bridge production?

There is no single best process. Powder-bed processes (selective laser sintering, SLS, and HP's Multi Jet Fusion, MJF) fuse nylon powder layer by layer and can nest many small parts in one build, without support structures. FDM extrudes a filament and builds each part from its own toolpath. Here is how they compare for a bridge run.

  • Best fit. FDM: engineering materials beyond standard nylon, larger or simpler parts, and runs where you want a person reviewing the file. SLS/MJF: many small, intricate nylon parts at once.

  • Material options. FDM: PLA, PETG, ASA, ABS, polypropylene, TPU, nylon (PA6, PA12) and carbon-fiber grades such as PA-CF, PPA-CF and PPS-CF. SLS/MJF: mainly PA12 and PA11 nylon; for polypropylene or filled nylons, check that the bureau offers it.

  • Minimum order. Ours: none; one part is a normal order. Bureaus vary.

  • File review and quote speed. Ours: a person reviews the file and we quote the same day.

  • Lead time. Ours: most parts ship 2-3 days after approval; larger runs are dated after file review.

  • Typical tolerance. Ours: ±0.2 mm typical on FDM parts.

  • Honest FDM limits. Visible layer lines, lower strength across layers than along them, and small, highly detailed parts that a powder-bed build handles better.

If your part is a small nylon clip and you need 300 of them, a powder-bed bureau will often be the efficient choice, and we will tell you so. If your part needs carbon-fiber stiffness, heat resistance, chemical resistance or polypropylene, FDM is often the better bridge.

Which materials push a bridge run to FDM?

The material question usually decides the process. These are the cases where FDM tends to win:

  • Carbon-fiber nylons for stiffness. PA-CF is a stiff, light all-rounder for brackets and housings. PPA-CF and PPS-CF go further on heat and chemical resistance. We keep all three in stock. See our PA-CF vs PPA-CF vs PPS-CF comparison.

  • Polypropylene for chemical resistance. If the molded part will be PP, a PP bridge part behaves far more like it than a nylon substitute does, especially around cleaners and chemicals. See polypropylene 3D printing.

  • ASA or PETG for outdoor or general-duty parts where a nylon powder part would be overkill.

  • TPU for flexible parts such as bumpers, grips and seals that don't need a molded elastomer yet.

A good rule: bridge in the closest printable cousin of the production resin, then test the printed part for the property that matters most (fit, stiffness, chemical exposure), not every property on the data sheet.

How do you plan a bridge run so the switch to molded parts is painless?

The risk in a bridge run is not the printing, it's the hand-off. Molded and printed parts are never identical, so plan the switch up front:

  1. Freeze a revision for the bridge. Print from a named revision of the CAD, and keep it on file so every bridge batch matches. Same part, same spec, every run.

  2. Design for both processes where you can. Generous fillets, even walls and no undercuts help both the mold and the print. If the mold design adds draft, decide whether the printed part should carry the same draft so mating parts fit both versions.

  3. Check mating fits with the real assembly. FDM holds about ±0.2 mm on typical parts. For press fits and snap fits, design clearance in or allow for light finishing. Our guide to designing FDM parts for wall thickness and tolerances covers the numbers.

  4. Orient for the load. Printed parts are strongest along their layers. Tell us how the part is loaded and we'll orient it accordingly.

  5. Label or segregate bridge parts. If the printed and molded parts will overlap in inventory, a part mark or a separate bin keeps traceability simple.

  6. Agree the cut-over point. Decide in advance whether the bridge stops at tool approval (T1 samples), at first production lot, or at a fixed quantity.

Bridge work also tends to bring tooling needs with it: assembly fixtures, check gauges and nests for the pilot line. Those are a natural fit for printing too. See our practical guide to 3D printed jigs and fixtures.

What does a real repeat production run look like?

Bridge and low-volume runs are repeat work, not one-offs. Molex has ordered repeat runs of polypropylene production parts from us. The pattern is the one most bridge runs follow: an approved file, a fixed material, and batches reordered as the line needs them, with no tool to amortize.

We carry validated designs into low-volume production, so nothing waits on hard tooling. Small-batch runs without a moulder's minimums are exactly the awkward middle we work in.

What should you send for a bridge-production quote?

To get an accurate quote, send:

  • The CAD file (.STEP preferred; .STL, .OBJ or .3MF also work, zipped).

  • The production material the molded part will use, and what the bridge part must survive (heat, chemicals, outdoor exposure, load).

  • The quantity you expect to need before the mold is approved, and how you'd like it split into batches.

  • Critical dimensions and mating parts, so we know where tolerance matters.

  • Your target date for first parts.

We sign NDAs. For more on the materials we print, see our materials guide.

Frequently asked questions

Can I 3D print parts while my injection mold is being made?

Yes. That is what bridge production is. Printed parts cover pilot builds, early orders or field trials until the mold is approved. Pick the process by material and quantity: powder-bed nylon for many small nylon parts, FDM for carbon-fiber nylons, polypropylene and other engineering materials.

Is SLS or FDM better for a 200-part run?

It depends on the part. For 200 small nylon parts with fine detail, SLS or MJF is often more efficient because many parts nest in one build. For larger parts, or parts that need PA-CF, PPA-CF, PPS-CF or polypropylene, FDM is often the better fit. Send the file and we'll tell you honestly which route suits it.

Which materials push a bridge run to FDM?

Carbon-fiber nylons (PA-CF, PPA-CF, PPS-CF), polypropylene, ASA, PETG and TPU. Powder-bed services focus mainly on PA12 and PA11 nylon, so if your production resin is something else, FDM usually gets you closer.

Is there a minimum order?

No. One part is a normal order, and a bridge run can be split into batches as your line needs them.

How fast can I get a quote?

We quote the same day after reviewing your file. Most parts ship 2-3 days after approval, and larger runs are dated after file review.

Discuss your bridge run

If your mold is on order and the launch date isn't moving, send us the file, the production material and the quantity you need before tool approval. We'll review it, tell you whether FDM or a powder-bed process fits better, and quote the same day. Discuss a low-volume production project, or call or text 630-485-9984.

 
 
 

Recent Posts

See All

Comments


For Questions:

Tel. 630-485-9984 Email: Joe.Stone@3Dinfinityprints.com

Text: 630.485.9984

​

Locations (we ship nationwide to all 50 states):

Florida (Tampa Bay): 160 16th St N, St. Petersburg, FL 33705 (by appointment only)

Missouri: 13 N 9th St, Columbia, MO 65201 (by appointment only)

Send us a message and we’ll get back to you shortly.

CAD files (.STL .STEP .OBJ .3MF): zip them first, then attach the .zip here.
How did you hear about us?

© 2023 by 3DInfinityPrints. 

Steve Miller Band - Fly Like An EagleSteve Miller Band
00:00 / 03:20
  • Our Etsy Storefront with over 1,000 sales
  • Instagram
  • Facebook
  • Linkedin
bottom of page